LOADING
BISCO® BF-1000 – A1 – White – 2.4mm | Rogers
24/09/2024
Tflex™ HD3180 Series – 4.5mm | Laird
01/10/2024
BISCO® BF-1000 – A2 – White – 2.4mm | Rogers
Performance Solid Silicone Sheet
£0.00
To get an instant quote for your custom parts, please select your currency and follow steps 1 to 4.
- Typical density of 12 PCF
- CFD range of 1-5 PSI
- Resistant to UV, ozone, extreme temperatures, flame, heat and vibration
- A2 = Adhesive on Both Sides
Available with lead time | Contact Us
Description
BISCO BF-1000 Extra Soft Cellular Silicone is a highly flame resistant material, ideal for sealing outdoor enclosures, protecting electronics from shock and heat and providing cushioning and vibration isolation. BF-1000 silicone’s excellent memory and low stress relaxation reduces maintenance costs from gasket failures caused by compression set and softening. Its extra softness allows designers to use less force to seal enclosures while still protecting devices from the environment. This material offers superior vibration isolation in electronic components and transportation vehicles. BF-1000 is also ideal for use in environmental seals to protect against penetration of dust, moisture, air or light within outdoor enclosures such as lighting fixtures, HVAC units and electronic cabinets.
A2 = Adhesive on Both Sides
Benefits
- Highly adaptable to various environments
- FDA compliant
- Softness allows protective seals that use less force
- High compressibility enables material to conform to variable width gaps, allowing greater design flexibility
- Reduces maintenance costs associated with gasket failures due to compression set and softening
Features
- Typical density of 12 PCF
- CFD range of 1-5 PSI
- Resistant to UV, ozone, extreme temperatures, flame, heat and vibration
Recommended Uses
- Gasketing and Sealing
- Cold Supply Chain
- Gap Filling
- Shock Absorption
- Vibration Managment
Physical Properties
| Properties | Test Method | Typical Value* | Specification** |
|---|---|---|---|
| Colour | Visual | Gray, Black, White | - |
| Thickness, mm (inch) | Internal | 1.59 - 25.40 (0.063 - 1.000) | - |
| Density, kg/m³ (lb./ft³) | Internal | 192 (12) | 156 - 316 (9.8 - 19.7) |
| Compression Force Deflection, KPa (psi) | ASTM D1056 | 16.5 (2.4) | 7 - 35 (1 - 5) |
| Compression, Set, % | ASTM D1056 100°C (212°F) / 22 hrs / 50% | 1.7 | < 5 |
| Tensile Strength, kPa (psi) | ASTM D412 | 262 (38) | > 138 (> 20) |
| Elongation, % | ASTM D412 | 86 | > 60 |
| Water Absorption, % | Internal 2" below water surface / 24 hrs / change in weight | 1.4 | < 10 |
Flammability Properties
| Properties | Test Method | Typical Value* | Specification** |
|---|---|---|---|
| Flame Resistance | UL 94 (File E83967) | Meets | V-0; HF-1 |
| Flame Spread Index (ls) | ASTM E162 | Meets | Flaming Mode < 35 |
| Smoke Density (Ds) | ASTM E662 | Meets | Flaming Mode, 1.5 min, < 100 Flaming Mode, 4.0 min, < 200 |
| Burn Length | FMVSS 302 | Meets | < 100 mm/min |
Thermal Properties
| Properties | Test Method | Typical Value* | Specification** |
|---|---|---|---|
| Temperature Range, °C (°F) | Internal | -55 to +200 (-67 to +392) | - |
| Thermal Conductivity, W/m °K | ASTM C518 | 0.048 | - |
| Low Temperature Flex | ASTM D1056 -55°C (-67°F) / 5 hrs | Pass | - |
| Low Temperature Brittleness | ASTM D746 -55°C (-67°F) / 3 min | Pass | - |
Outgassing Properties
| Properties | Test Method | Typical Value* | Specification** |
|---|---|---|---|
| Total Mass Loss (%) | ASTM E595 (4x10* -6 Torr) | 3.46 | - |
| Collected Volatile Condesible Materials (CVCM) (%) | ASTM E595 (4x10* -6 Torr) | 1.12 | - |
| Water Vapor Regain (%) | ASTM E595 (4x10* -6 Torr) | 0.04 | - |
Electrical Properties
| Properties | Test Method | Typical Value* | Specification** |
|---|---|---|---|
| Dielectric Strength, Volts/mil | ASTM D149 | 72 | - |
| Dielectric Constant, 1 kHz | ASTM D150 | 1.5 | - |
| Dissipation Factor, 1 kHz | ASTM D495 | 0.004 | - |
| Dry Arc Resistance, Seconds | ASTM D495 | 123 | - |
| Volume Resistivity, Ohm-cm | ASTM D257 | 10^14 | - |
Materials Direct
Precision cut technical materials fast
We’re available to assist you for your next project
A division of Universal Science UK
www.universal-science.com
Related products
-
Select optionsBISCO® HT-800 – A0 – Grey – 0.8mm | Rogers
£0.00 SKU: 93005- Density of 352 kg/m³
- CFD range of 9.7 PSI
- Resistant to UV, ozone, extreme temperatures and flame
- No Adhesive
-
Select options
BISCO® BF-1000 – A1 – White – 2.4mm | Rogers
£0.00 SKU: 93093- Typical density of 12 PCF
- CFD range of 1-5 PSI
- Resistant to UV, ozone, extreme temperatures, flame, heat and vibration
- A1 = Adhesive on One Side
-
Add to basket
BISCO® BF-1000 – A2 – White – 2.4mm | Rogers
£0.00 SKU: 93094- Typical density of 12 PCF
- CFD range of 1-5 PSI
- Resistant to UV, ozone, extreme temperatures, flame, heat and vibration
- A2 = Adhesive on Both Sides
