LOADING
GP60 Silicone – Translucent – 1.5mm | Silex
21/02/2024GP60 Silicone – Translucent – 3mm | Silex
21/02/2024
GP60 Silicone – Translucent – 2mm | Silex
Silicone Rubber Sheet - GP 60
£0.00
To get an instant quote for your custom parts, please select your currency and follow steps 1 to 4.
- Hardness Shore A ±5 – 60°
- Suitable for use from -60°C up to +230°C with capabilities at 250°C intermittently
- Compliant to FDA 177.2600 and EC 1935/2004
9 Sheets In Stock
Description
Silex General Purpose Silicone Supplied in Translucent, this product is excellent for applications requiring good sealing properties at high and low temperatures, and is suitable for use from -60°C up to +230°C with capabilities at 250°C intermittently. This sheeting is fully compliant to FDA 177.2600 and EC 1935/2004, making it suitable for applications requiring direct food contact.
These products meet the flammability requirements of FAR 25/JAR 25/CS 25 Appendix F, Part 1, (a)(1)(iv) and (a)(1)(v) horizontal flammability test and Automotive Standard PART 571MVSS302.
Benefits
- Silicone rubber has excellent resistance to ozone, oxidation, ultraviolet light, corona discharge, cosmic radiation, ionising radiation and weathering in general.
Features
Hardness Shore A ±5 - 60°
Environmental Resistance
- Ozone
- Oxidation
- Ultraviolet Light
- Corona Discharge
- Cosmic Radiation
- Ionising Radiation
- Weathering in General
Accreditations
- FDA 21 CFR 177-2600 Compliant
- BfR Compliant
- EU 1935/2004
- WRAS Compliant
- FAR 25/JAR 25/CS 25 Appendix F, Part 1, (a)(1)(iv) (a)(1)(v) horizontal flammability test
- Automotive Standard PART 571MVSS302
- REACH Compliant and ROHS Compliant
Recommended Uses
- Automotive
- Domestic & Commercial
- Catering
- Electronics
- Construction
- Energy
- Food & Beverage
- Heating and Ventilation (HVAC)
- Industrial
- Insulation
- Lighting
- Marine
Mechanical Properties
| GP20 | GP30 | GP40 | GP50 | GP60 | GP70 | GP80 | |||
|---|---|---|---|---|---|---|---|---|---|
| Property | Units | Typical Value | Typical Value | Typical Value | Typical Value | Typical Value | Typical Value | Typical Value | Test Method |
| Hardness | Shore A ±5 | 20° | 30° | 40° | 50° | 60° | 70° | 80° | DIN ISO 7619-1 |
| Tensile Strength | Mpa (PSI) | 10,1 (1464) | 8.0 (1150) | 9.0 (1300) | 9.0 (1300) | 10.0 (1450) | 10.0 (1450) | 7.0 (1015) | ISO 37 type 2 |
| Elongation to Failure | % | 979 | 500 | 525 | 450 | 400 | 320 | 215 | ISO 37 type 2 |
| Tear Strength | N/mm (lb./in.) | 25,0 (142) | 16.0 (91) | 23 (130) | 18 (100) | 22 (125) | 20 (115) | 17 (88.5) | ASTM D624 die B |
| Compression Set 24 Hrs @ 150°C | % | 23 | 23 | 25 | 15 | 13 | 9 | 18 | DIN/ISO 815 type B |
| Compression Set 22 Hrs @ 300°F | % | - | 20 | 22 | 16 | 10 | 10 | 16 | ASTM D395 method B type 2 |
General Characteristics
| Test | Result | Standard |
|---|---|---|
| Brittle Point | -80°C (-112 °F) | ASTM D746 |
| Limiting Oxygen Index | 24.0 % | BS 2782 Part 1 |
| Thermal Conductivity | 0.24 W.m¯¹.K¹ | VDE 0304 |
| Radiation Resistance | > 10⁵ Grays (10⁷ Rads) typical | - |
| Dielectric Strength | 23 kV.mm¯¹ | VDE 0303 |
| Dielectric Constant | 2.9 | VDE 0303 |
| Dissipation Factor | 3x10¯⁴ | VDE 0303 |
| Volume Resistivity | 3x10¹⁵Ω.cm | VDE 0303 |
Materials Direct
Precision cut technical materials fast
We’re available to assist you for your next project
A division of Universal Science UK
www.universal-science.com
Related products
-
Select optionsBISCO® HT-800 – A0 – Grey – 0.8mm | Rogers
£0.00 SKU: 93005- Density of 352 kg/m³
- CFD range of 9.7 PSI
- Resistant to UV, ozone, extreme temperatures and flame
- No Adhesive
-
Select options
BISCO® BF-1000 – A1 – White – 1.6mm | Rogers
£0.00 SKU: 93102- Typical density of 12 PCF
- CFD range of 1-5 PSI
- Resistant to UV, ozone, extreme temperatures, flame, heat and vibration
- A1 = Adhesive on One Side
-
Select options
GP50 Silicone – Translucent – 2mm | Silex
£0.00 SKU: 93010- Hardness Shore A ±5 – 50°
- Suitable for use from -60°C up to +230°C with capabilities at 250°C intermittently
- Compliant to FDA 177.2600 and EC 1935/2004
